DESCRIPTION
This product is an efficient, moisture-proof, and anti-seepage sealing material developed by absorbing advanced technologies at home and abroad. It is also a good adhesive material. This material is divided into two types: rapid setting and slow setting, both of which are single component gray powders.
Product Features
1. Construction with water, quick leak prevention, moisture proofing, and anti-seepage
2. Suitable for both upstream and downstream surfaces, with simple construction
3. Non toxic, harmless, and pollution-free
4. High impermeability, strong bonding ability, and good waterproof effect
scope of application
The Aidun Ace Leak Sealing King can be used for moisture-proof, anti-seepage and repair of various brick and stone, new and old concrete buildings, as well as for moisture-proof, anti-seepage and leak sealing of various underground buildings, structures, channels, toilets, bathrooms and water pools.
usage method:
1. Firstly, chisel the leaking point into a horn mouth, clean up any debris or loose powder, expose a hard and rough surface, and wet it with water;
2. Take an appropriate amount of this product and place it in a mixing container. Add water in a ratio of 1:0.3 (mass ratio) according to the formula of "Leak King: Water". Stir quickly and thoroughly until evenly mixed. When the ambient temperature is low, increase the temperature of the mixing water appropriately;
3. Rub the mixed sealing adhesive into a wet mass by hand. When you feel the adhesive start to heat up, quickly press it into the chiseled hole in the direction of the water leakage. Then immediately press it flat with a wooden board and press it firmly until it hardens (about 2-3 minutes);
4. For seepage pits, the plugging powder can be directly injected into the pit, then pressed down and allowed to harden;
5. For severe water leakage cracks, drainage methods are used, first blocking the cracks and finally blocking the drainage holes;
6. For large-scale leakage, it is necessary to identify and block the seepage points, and then apply cement waterproof mortar for surface treatment.
Store in a cool and dry place. After opening the bag, it is usually used up at once. If it cannot be used up, the remaining part should be quickly sealed. During transportation, it should be protected from rain and sun exposure.
This product can be divided into rapid setting and delayed setting. Please choose to use Aidunwang Leak Stopper according to the actual situation!